Safety-certified tools Tools for Automotive Applications C-STAT Static analysis C-RUN Runtime analysis Debugging and trace probes
IAR Embedded Workbench for RISC-V now releasedTools for Risc-V
This information applies to users using the 'IAR License Server Tools' to share licenses over a network.
The problem that no license is supplied from the server can be due to different reasons. Possible symptoms are:
During the 'Activation' of a license server is there Internet communication to IAR. This can fail.
The License Manager communicates with IAR using SOAP over https (port 443).
So open that port, and try again to Activate the license.
The license is stored in a file named 'lservrc'. If the location for this file is protected, then the 'IAR License Server Tools' can't hand out licenses. Check the write privileges for the directory of
C:\Program Files (x86)\Common Files\SafeNet Sentinel\Sentinel RMS License Manager\WinNT
Try again to activate the license.
C) License is 'invalid'
The dongle driver might not be installed as it should be. Go to Technical Note 44489. Test the suggestions there.
D) Check network
The clients broadcasts for the 'IAR License Server Tools' on UDP port 5093. This port must be open in the server, or it won't be found by the clients.
Open the port on the Server, and on any intervening network 'bridges'.
Try again from the client.
Check if there are new versions of 'IAR License Server Tools', and if yes, then install them and see if that solves the problem.
This Technical Note applies to these product(s) of the mentioned versions (or later).
All product names are trademarks or registered trademarks of their respective owners.